General Specification - Facom 712A Manual Del Usuario

• Remaining endangerment: When an input terminal is connected to dangerous live
potential, this potential can occur at all other terminals!
• cAt iii - Measurement Category III is for measurements performed in the building
installation. Examples are measurements on distribution boards, circuit breakers,
wiring, including cables, bus-bars, junction boxes, switches, socket-outlets in the fixed
installation, and equipment for industrial use and some other equipment, for example,
stationary motors with permanent connection to the fixed installation. Do not use the
meter for measurements within Measurement Categories IV.
caution
To avoid possible damage to the meter or to the equipment under test, follow these
guidelines:
• Disconnect circuit power and discharge all capacitors before testing resistance,
diode, capacitor and continuity.
• Use the proper function for your measurements.
• Before rotating the rotary switch to change functions, remove test leads from the
circuit under test and remove the jaws from the clamped conductor.
electrical symbols
Alternating Current
Direct Current
Both direct and alternating current
Caution, risk of danger, refer to the operating manual before use.
Caution, risk of electric shock.
Earth (ground) Terminal
Conforms to European Union directives
The equipment is protected throughout by double insulation or reinforced
insulation.
iNtroDUctioN
This meter is a 3 3/4-digit autorange digital clamp meter for measuring DC and AC
voltage, DC and AC current, resistance, temperature, diode and continuity. It is easy to
operate and is an ideal measurement tool.

GeNerAL sPeciFicAtioN

Display: 3 3/4-digit LCD, with a max. reading of 3999
Negative Polarity indication: "
overrange indication: "OL" shown on the display
sampling rate: about 3 times/sec
Jaw opening capability: 33mm
max. measurable conductor: Ø28mm
battery: 1.5V battery, AAA or equivalent, 2 pieces
Low battery indication: "
operation environment: 0°C - 40°C, < 75%RH
storage environment: -10°C - 50°C, < 85%RH
size: 209x71x40mm
Weight: about 236g (including batteries)
" shown on the display automatically
" shown on the display
12