Installation of valve adapter and auxiliary equipment
Fitting the adapter
The valves Honeywell-Braukmann, MNG, Heimeier, Junkers,
Landis & Gyr 'Duogyr' do not require an adapter.
Some valve types require adapters.
1. Select the required adapter.
2. Open up the adapter and push it onto the valve as far as the stop. Turn it
while doing so until you feel it click into place.
3. If provided on the adapter: Tighten up the adapter with the screw or insert
adapter pin.
Adapter Type
Oventrop HU 01
(M30x1 knurled nut)
Herz HU 02
(M28 knurled nut)
Danfoss Adapter Set EVA 1-Danfoss
RAV
(grey)
Vaillant-Adapter EHA 1VAI
RA
(white)
Order No.
073341076
073341725
072031201
RAVL
(black)
072031082
31