Desktop Installation - Tripp-Lite NGS8C2POE Manual Del Propietário

Installation

Desktop Installation

1 Attach the four included rubber feet to
the bottom of the unit. Place the switch
on a flat desktop surface. Inspect and
install the power adapter to a proper AC
power source.
2 Connect the power supply to the switch.
The Power LED will illuminate when the
switch powers on.
3 Ensure adequate ventilation around the
switch for proper cooling.
4 Connect network cables to the network
switch.
17-04-027-93368F.indb 5
FLAT DESKTOP SURFACE
1
2
3
4
5
4/5/2017 3:47:18 PM