Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 94" from the Bluetooth device list first.
2. Take out one of the earbuds, press and hold the Multifunction Touch Control
of the earbud for 10 seconds until the LED indicator flashes white three times.
The pairing history is then cleared with the earbud off.
3. Take out the other earbud, press and hold its Multifunction Touch Control for
10 seconds until the LED indicator flashes white three times. The pairing
history is then cleared with the earbud off.
4. Put both earbuds back into the charging case, then take them out to re-pair
with your Bluetooth® device as instructed in "Pairing" section.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or remove "TAOTRONICS SoundLiberty 94" from its Bluetooth list.
Restore the earbuds to factory settings as instructed above if pairing failed.
07
OPERATION AND FUNCTIONS
Function
Operation
Tap the Touch Control on the right
Play / Pause
earbud twice under music
Tap the Touch Control on the
Volume +
right earbud
Tap the Touch Control on the
Volume -
left earbud
Tap the Touch Control on the
Next Track
right earbud three times
Tap the Touch Control on the
Previous Track
left earbud three times
Answer Phone
Tap the Touch Control on
Call
either of the earbuds once
Hang Up
Tap and hold the Touch Control on
Phone Call
either of the earbuds for 2 seconds
Decline an
Tap and hold the Touch Control on
Incoming Call
either of the earbuds for 2 seconds
Only available in Couple Earbuds Mode:
• Tap and hold the Touch Control on
Turn On / Off
the left earbud for 2 seconds to turn
ANC Function
on/off ANC function
• Couple Earbuds Mode: ANC ON
Voice Prompt
/
Toots when highest
setting is reached
/
/
/
/
/
Call rejected
ANC ON/OFF
08