Specifications And Technical Data - MELICONI AT49 Instrucciones De Uso

D

SPECIFICATIONS AND TECHNICAL DATA

• Amplified indoor aerial
• Dimensions and weight (aerial only): 170 x 102 x 190 mm, 460 g
• Power supply:
Power unit:
• Reception of digital terrestrial TV signals (DVB-T/DVB-T2) and DAB and DAB+ digital
radio signals.
• Reception range: VHF-band III (174~230 MHz) and UHF (470~694 MHz).
• Anti-interference filters for 433MHz, 5G, 4G and GSM bands.
• MMIC Noise amplifier figure: < 1dB
• Adjustable gain.
• Consumption: < 2 W
• Output impedance: 75 Ohm
• Temperature of use: 5~40 °C, humidity <85% (without condensation)
TWO YEAR WARRANTY - The warranty lapses if the product is tampered with or used impro-
perly. Retain the purchase receipt for any claims on the warranty.
The manufacturer, Meliconi SpA, declares that the "AT49 R1 amplified aerial" type of radio
equipment is in compliance with the 2014/53/EU (RED) Directive
The full text of the Declaration of EU Conformity is available at the following internet address:
www.meliconi.com/doc/at49r1
The symbol of the crossed-out rubbish bin displayed on the device indicates that, at the end of its useful life, the product must be
collected separately from other waste. The user must, therefore, must take the device, at the end of its useful life, to suitable
differentiated electrical and electronic waste collection centres, or return it to the retailer when buying a new device of an equivalent type.
The appropriate differentiated collection will ensure that discarded equipment can subsequently be recycled, treated and disposed of in
an environmentally-compatible way. This will help prevent any possible negative effects on the environment and health and will facilitate
the recycling of the materials with which the device was made.
Power in: 5Vdc/100mA
Antenna in: 5Vdc/50mA
IN: 100~240Vac/50-60Hz
OUT: 5Vdc/1A 5W (efficiency level VI)
Simplified declaration of EU conformity
8