Keypad Symbols - DSC neo Power Serie Instrucciones De Instalación

[011] Keypad Input/Output Programming
Zone / PGM Number Default 000 |_____|_____|_____|
[012] Local PGM Output Pulse Activation Time
|_______|_______| Minutes (00-99)
[021] First Keypad Options
Default Opt. ON
ON |____| 1 Fire Key Enabled
ON |____| 2 Medical Key Enabled
ON |____| 3 Panic Key Enabled
Display Access Code When Pro-
ON |____| 4
gramming
NOTE: For EN50131-1/EN50131-3 compliant systems, section [021], options 1 and 2 shall be OFF.
[022] Second Keypad Options
Default Opt. ON
ON |____| 1 Local Clock Display ON
OFF |____| 2 Local Clock Displays 24-hr
ON |____| 3 Auto Alarm Mem Scroll ON
ON |____| 4 For Future Use
OFF |____| 5 Power LED Enabled
ON |____| 6 Power LED AC Present ON
ON |____| 7 Alarms Displayed While Armed
OFF |____| 8 Auto-Scroll Open Zones ON
[023] Third Keypad Options
Default Opt. ON
OFF |____| 1 Armed LED Power Save
ON |____| 2 Keypad Status Shows Stay Arm
OFF |____| 3 5th Terminal is PGM Output
ON |____| 4 Prox Tag Will Arm/Disarm
OFF |____| 7 Local Display of Temperature
OFF |____| 8 Low Temperature Warning Enabled
[030] Downloaded LCD Message
|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|
|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|
NOTE: Clock display (Section [022], Option 1) must be enabled.
[031] Downloaded LCD Message Duration
Default: 000 |_____|_____|_____|
This number represents the number of times the downloaded message must be cleared before it is per-
manently removed. This message can be cleared by pressing any key.
[041] Indoor Temperature Zone Assignment
Default: 000 |_____|_____|_____| (Valid entries are 000-128)
|_______|_______| Seconds (00-99)
OFF
Fire Key Disabled
Medical Key Disabled
Panic Key Disabled
Display Xs When Programming
Access Codes
OFF
Local Clock Display OFF
Clock Displays AM/PM
Auto Alarm Mem Scroll OFF
For Future Use
Power LED Disabled
Power LED AC Present OFF
Alarms Not Displayed While Armed
Auto-Scroll Open Zones OFF
OFF
Armed LED Off in Sleep Mode
Keypad Status Shows Stay/Away Arm
5th Terminal is Zone Input
Prox Tag Does Not Arm/Disarm
No Local Display of Temperature
Low Temperature Warning
Disabled
(Valid entries are 000-255, 000=Unlimited Msg Display)
[042] Outdoor Temperature Zone Assignment
Default: 000 |_____|_____|_____| (Valid entries are 000-128)
[101]-[228] Door Chime for Zones
Default: 01 |_____|_____|
The keypad can be programmed to make up to four different chime sounds for individual zones.
(e.g., for Zone 1, enter section [101], for Zone 2 enter section [102]).
01 6 beeps
02 Bing bing tone
03 Ding dong tone
[991] Reset Keypad Programming to Factory Defaults
1. Press [*][8][Installer Code].
2. Enter [991].
3. Use the [<][>] keys to scroll to the applicable keypad.
4. Press [*] to select the keypad.
5. Re-enter [Installer Code].
6. Press [*] to reset the selected keypad to factory defaults

Keypad Symbols

Table 4: Keypad Display Symbols
3 4 5 6
1 2
8 10
9
1 Memory – Indicates that alarms are in memory.
2 Fire – Indicates that fire alarms are in memory.
Clock Digits – These digits indicate the hour and
minutes when the local clock is active, and also
identify the zone when the OPEN or ALARM
3,4,5
icons are active. These digits scroll one zone per
second from the lowest zone number to the
highest when scrolling through zones.
1 to 8 – These numbers display toggles or digits
6
in binary while they are needed.
Bypass – Indicates that there are zones auto-
7
matically or manually bypassed.
Open – When zones are opened, this icon will
8
turn on and the open zones are displayed.
Program – If the system is in Installer's or
User's Programming, or the keypad is busy, this
9 icon flashes. If an access code is required while
accessing star menus, this LED is on steadily to
indicate that the code is required.
04 Alarm Tone (4s duration)
05 Zone Name
13
7
14
15
16
17
11 12
Chime – Turns on when Door
10 Chime is enabled and off when
Door Chime is disabled.
Away – Indicates that the panel
11
is armed in away mode.
Stay – Indicates that the panel is
12
armed in stay mode.
Night – Indicates that the panel is
13
armed in night mode.
Ready Light (green) – If the
14 Ready light is on, the system is
ready for arming.
Armed Light (red) – If the Armed
15 light is on, the system has been
armed successfully.
System Trouble – Indicates that a
16
system trouble is active.
AC – Indicates that AC is
17
present at the main panel.