Basic Operations; Menu Operation - Premier TV-4553LED Manual De Instrucciones

Basic Operations

Menu Operation

1
Input Setup
Press INPUT key on the remote control to enter "INPUT
SOURCE" menu. There are ten options for you to select:
"TV", "AV1", "AV2", "YPbPr", "VGA", "HDMI1",
"HDMI2", "HDMI3", "HDMI4" and "USB".
▲ q
Use / key to move the cursor to the input you desired
and press ENTER key to confirm.
2
Channels Selection
There are four ways to select channel:
1) Using number keys and ,
to select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select channels that were either
erased or not memorized.
r s
2) Using CH / key on the remote control or on your TV to select channel.
r s
When you press the
CH
all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press CH RTN key to return to previous channel, press it again to return to
current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number keys to select the second channel. Then use the
alternate between them.
CH RTN is not activated if no channel has been changed after TV turning on.
)
4 Select channels from "All Channels List" or "Favorite Channels List".
Press LIST key to display "Channel List" menu.
3
olume Adjustment and Mute Setup
V
Volume adjustment
r s
Press VOL / key on the remote control or on the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using
(
To increase the volume, press
(
To decrease the volume, press
Mute
Press " MUTE" and the sound cuts off. The MUTE icon will appear in the lower-left
corner of the screen.
To resume sound, press the "
ENTER keys on the remote control
9
0
.
ENTER
/ key, the TV changes channels in sequence. You will see
VOL
r
VOL key;
s
VOL key;
MUTE " button again, or simply press the VOL
16
Input Source
TV
AV 1
AV 2
YPbPr
VGA
HDMI1
HDMI2
HDMI3
HDMI4
USB
Select Enter
ENTER
CH RTN button to quickly
r s
/ key:
r
key.