Orbegozo CTP 3500 Manual De Instrucciones página 19

CTP 3500
DESCRIPTION OF LED DISPLAY
1. The LED display will light up completely when you connect the adaptor to hair clipper. After that, battery
of clipper starts charging and LED display will show the numbers from 0 to 100 depending on charge
level and it will increase while it is charging.
2. LED display will show 100 when battery is completely charged. LED display will turn off 5 minutes after
battery is completely charged.
3. When you are using the clipper, indicator numbers of battery level will decrease from 100 to 0%. Battery
symbol will blink when battery level is 10%; the appliance will turn off automatically when the indicator
reaches 0% and cannot turn on again if you don't recharge it or plug to mains with adaptor.
4. Please, add oil to blade when its indicator light reminds you in LED display.
5. The LED display also shows selected power cutting. Low level will show 1 bar, middle level with 2 bars
and high level with 3 bars.
19