Pneumax 1800 Serie Instrucciones De Montaje página 26

Electric cylinders
Series 1800
Position
1
2
3
4
5
6
7
8
9 Short mounting foot brackets (MS1)
10
11
12
13 Support for intermediate trunnion
14
15
16 Rear male clevis (with jointed head - MP6)
17
Complete square angle trunnion
18
19
Square angle trunnion with jointed head
20
21 Square angle trunnion (AB7) (pos.15+22)
22
Simple rear trunnion with support brackets
23
24
25
26 Standard complete trunnion (pos.14+15)
Attention
Ensure that the load being moved by electric cylinder is lower than Admitted axial load
(see section "Technical Data")
Use the screws supplied with the fastening system to avoid damaging the device or the
possibility of having a failed fixing.
Apply the recommended screw fixing torques.
24 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
Description
Rod nut
Ball joint
Fork
Fork with clips
Self-aligning joint
Sensor bracket
Intermediate supports
Flange (MF1-MF2)
Short mounting foot brackets
Front clevis (not according
to standard ISO 15552)
Intermediate trunnion
Rear male clevis (MP4)
Rear female clevis (MP2)
Rear narrow clevis (AB6)
(pos.17+19)
Simple square counter clevis
(pos.16+17)
Simple square counter clevis
(pos.24+15)
Simple square counter clevis
Standard trunnion
Alluminium
/ 1320.Ø.18F
/ 1320.Ø.32F
/ 1320.Ø.13F
/ 1320.Ø.13/1F
/ 1320.Ø.33F
1320._S
1800.Ø.02F
1390.Ø.03FP 1380.Ø.03F
/ 1320.Ø.05/1F
1320.Ø.05F
1380.Ø.08F 1320.Ø.19F
1320.Ø.12BF 1320.Ø.12F
1320.Ø.12/1F
1380.Ø.09/1F 1320.Ø.21F
1380.Ø.09F 1320.Ø.20F
1380.Ø.15F 1320.Ø.25F
1380.Ø.30F 1320.Ø.29F
/ 1320.Ø.27F
/ 1320.Ø.28F
1380.Ø.36F 1320.Ø.26F
1380.Ø.35F 1320.Ø.23F
1320.Ø.11/2F 1320.Ø.24F
1380.Ø.11F
1320.Ø.11/1F
1380.Ø.10F
1320.Ø.22F 1320.Ø.22F
Steel
/
/
/
/
/
/