Pneumax 1800 Serie Instrucciones De Montaje página 28

Electric cylinders
Series 1800
In-line motor assembing
1
17
9
4
5
assembling
B
1) Mounting the coupling pos.9 on the previously degreased cylinder shaft (see below image) and fix
the screw pos.17 (Use the torque shown in tab. 1).
2) Mount the drive coupling pos.4 on the coupling pos.9.
3) Mount seal pos.5 on the head pos.1.
4) Mount component pos.6 on the head pos.1 and fix with screws as shown in pos.8
(respect torque in table 1).
5) Mounting seal pos.7 on the component pos.6.
6) Now, in base of the motor used, define if follow mounting A or B:
Mounting A (small size motor)
7) Mount the coupling pos.9 on the
degreased
motor shaft. (see right image) and fix with
the screw pos.17 (respect torque in table 1).
8) Mount the motor, position to insert the drive
coupling pos.4 in the coupling pos.9.
9) Fixing the motor with the screws pos.11
(respect torque in table 1).
Mounting B (big size motor)
7) Mount the flange pos.13 on the component pos.8
and fix with screws pos.14 (respect torque in table 1)
8) Mount the seal pos.15 on the flange pos.13
9) Mount the coupling pos.16 on the
degreased
motor shaft (see right image) and fix with
the screw pos.17 (respect torque in table 1).
10) Mount the motor and align to insert the drive pos.16.
11) Fixing the motor with the screws pos.18
(respect torque in table 1).
26 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
Cylinder shaft
17
6
7
8
13
14
15
Coupling position
assembling pos. 9
previously
previously
1
9
4
5
6
17
16
18
19
Table 1
Screw thread M3
Screw thread M4
Screw thread M5
Screw thread M6
Screw thread M8
Coupling position assembling pos. 9
Coupling position assembling pos. 16
assembling
A
7
8
17
9
11
12
Motor shaft
torque 1,5 Nm
torque 3,5 Nm
torque 6,5 Nm
torque 15 Nm
torque 25 Nm