Planeta 9354 Serie Instrucciones De Manejo página 10

CE Konformitätserklärung
Hiermit erklären wir, die PLANETA-Hebetechnik GmbH in Herne,
dass das Produkt:
PLANETA - Federzüge Serien 9354 - 9355 - 9356 - 9357 - 9358 - 9359
in der serienmäßigen Ausführung folgenden einschlägigen Bestimmungen entspricht:
EG-Richtlinien: 2006/42/EG
Dipl.- . P. Klawitter, Geschäftsführer PLANETA
Manual Instruction for:
PLANETA-Balancers – Models 9354 - 9355 - 9356 - 9357 - 9358 - 9359
I. Description
Models 9354 - 9355 - 9333 - 9356 - 9357 - 9358 - 9359, medium duty balancers, are
designed for balancing the weight of tools and equipment. PLANETA is not responsible with
regard to clients who use these balancers for other applications for which PLANETA was not
consulted.
II. Important indications
1. Read instruction and make it available to operators on the device before using it.
2. Operator must be instructed properly with the device.
3. Arbitrarily retrofitting and modifications to the
4. Check the device regarding damages, unfastened screws or twists before using it and
eliminate failures.
5. Repair works on PLANETA
manufacturer or an instructed repair shop respectively by using PLANETA spare parts.
6. Non-observance of the instruction, improper use, and corrosion by insufficient protection
or product alterations without authority result in the expiry of the warranty.
7. Risk of corrosion in case of continuous contact with unfavourable atmospheric
conditions as for example high humidity or harmful environmental influences as for
example atmospheres with acid vapours, corrosive gases or high dust concentration
cause early wear. This effectuates no claim under warranty.
8. Further information or spare part lists will kindly be provided by us or your specialist
dealer.
III. Guarantee conditions
The manufacturer provides 24 months guarantee on material and function according
to the guarantee conditions. The manufacturer is not liable for damages caused by improper
operation and installation by the user. Arbitrary opening and possible removal and
replacement of the balancer
IV. Balancer start-up
1. This balancer can be used dn on assembly line and in individual work stations.
2. Use, check and maintain this balancer in perfect efficiency in accordance with all
standards relating to balancers, tools and work stations.
balancer
Balancer devices shall only be carried out by the
also cancels the guarantee.
– 10 –
will cancel the warranty.
GB