Wolf E Serie Guía De Uso Y Cuidado página 6

OVEN OPERATION
Oven Operation
OVEN RACK POSITION
The oven rack and oven pan can be placed in any of the
four positions labeled on the right front face of the oven.
Refer to the illustration below.
Rack position.
|
6 English
PRIOR TO USE
To ensure all residual oil from the manufacturing process
has been removed, the oven must go through the following
procedure.
Clean oven thoroughly with hot water and a mild deter-
1
gent. Rinse and dry with a soft cloth.
Turn on ventilation. Some smoke and odor is normal.
2
Select Roast mode and 300°C. Heat oven (empty) for 60
3
minutes.
SELECT COOKING MODE
Press multiple times until desired cooking mode is
1
displayed, then press .
SELECT TEMPERATURE
Press .
1
Turn knob to desired temperature, then press
2
To adjust temperature during cooking, press and turn
the knob to the desired temperature, then press
TIME
It is very important the correct time is set if a timed cook
feature is used. Time must be reset after a power outage.
Setting time:
With oven off, press .
1
Turn knob to set the hour, then press .
2
Turn knob to set the minutes, then press .
3
TIMER
The timer can be set for a maximum of 9 hours and 59 min-
utes. Once the timer is set, the countdown is illuminated on
the display. The timer is independent from the oven. Setting
the timer does not affect operating time or switch-off time.
Setting timer:
Press .
1
Turn knob to set duration, then press .
2
To reset, press and turn the knob to select the desired
duration, then press . To cancel, press twice, then
press .
USER SETTINGS
The user settings allow the user to select preferences for
language, childproof lock, time display, acoustic signal,
illumination, temperature unit, contrast, time format and
factory settings.
The control panel can be locked through user settings. To
use the oven by temporarily disabling the lock, press and
.
continue to hold , then press . The lock will automati-
cally reactivate 10 minutes after the oven has been turned
off.
.
Setting user settings:
With oven off, press and turn knob to USER
1
SETTINGS, then press .
Turn knob to scroll through options, then press
2
Follow instructions on the display, then press
3
.
.