Orbegozo PC 5000 Manual De Instrucciones página 7

PC 5000
Operation guide
• Open the battery compartment. Insert two AAA 1.5V batteries respecting the polarity.
• Hold the scale and hold the hook upright. Press the "POWER" key to turn on. The display will show
the digits to zero and you can proceed to weigh.
• Press the "POWER" key again and the scale will turn off.
• Press the "HOLD" key to lock the screen. Then "LOCK" will be displayed and the weight will be
blocked.
• Press the "HOLD" key again to resume the display.
• Press the "UNIT" key to change the unit of measure kg / lb / N
• Tare function: The "TARE" button resets the screen to zero when the weight is on the scale, which
allows you to subtract the weight of a container.
1. When the reading stabilizes, press the TARE key once.
2. The screen will be set to zero, which will allow you to add items and obtain the weight of the
contents (net weight).
Cleaning and maintenance
-To clean it, use a damp cloth
-Do not overload the balance. It could cause damage
-Do not leave weight on the balance when it is not in use.
-Replace the battery when the scale shows "LO" on the screen.
-The LCD shows "Err" when there is an overload.
7