3.Place the waterproof tapes supplied with
the KIT.
5.Push up the houvre behind nameplate
the louvre and place the label. You can
use the labels supplied with the Outdoor
Panel.
Pag 22
4.Use the hinges to connect the wires and
handle the Panel comfortably.
6.Close the Panel and fasten the screws
with the allen key supplied. Place the
covers to finish the installation.
NOTE:
The camera included in the Outdoor
Panel has a Pan&Tilt control which
allows the objetive to be moved 10° in
all directions, so to focus the camera
into the desired direction, during the
Panel installation.