Makita XBU02 Manual De Instrucciones página 47

Malfunction status
available after replacing the
battery cartridge with a fully
charged one.
installed.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attach-
ments are recommended for use with your
use of any other accessories or attachments
might present a risk of injury to persons. Only
use accessory or attachment for its stated
purpose.
If you need any assistance for more details
regarding these accessories, ask your local
Makita Service Center.
WARNING: If you purchase a guide bar
of different length from the standard guide
bar, also purchase a suitable guide bar
the guide bar on the chain saw.
NOTE: Some items in the list may be included
in the tool package as standard accessories.
Cause
Depending on the usage condi-
not available after replacing the
battery cartridge.
and sprocket is not correct.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for
the most current warranty terms applicable to
this product.If annexed warranty sheet is not
available, refer to the warranty details set forth at
below website for your respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
23
ENGLISH
Action
Use the tool in the normal mode
until the installed battery car-
tridge becomes empty, and then
replace the battery cartridge
with a fully charged one, or
recharge the battery cartridge.
Use the correct combination
of saw chain and sprocket
by referring to the section for