Cleaning The Filter Element; Replacing The Filter Element - Stihl SE 122 Manual De Instrucciones

English
When dry-vacuuming with filter bag
1
N Pull filter bag sleeve (1) off intake
port and seal opening in filter bag
sleeve with slide (2)
N Carefully remove filter bag from
container and dispose of in
accordance with statutory
regulations
3
N Insert new filter bag (3) (instructions
on filter bag)
N Push filter bag sleeve onto intake
port as far as possible
Refit the upper part of the vacuum
cleaner
N Clean the edge of the container
N Refit the upper part of the vacuum
cleaner
N Clean the sleeve and intake port
before fitting the suction hose
12

Cleaning the filter element

2
N Squeeze sleeve (1) of suction hose
(arrows) together to release it
N Remove suction hose
N Switch on machine
N Seal the hose at the sleeve by firmly
pressing the sleeve against the flat
surface beside the switch (as shown
in picture)
N Press the filter cleaning button 3
times
Dust deposits are removed from the filter
element.

Replacing the filter element

1
N
N
N
N
N
N
N
1
2
Unplug the power plug from the
socket
Remove upper part of vacuum
cleaner and turn it over
Unscrew supporting cage for
filter (1)
Remove filter element (2) and
dispose of it in accordance with the
statutory regulations
Fit new filter element in the reverse
sequence of steps
Check correct operation of the float:
the float must move easily when the
supporting cage for the filter is
turned over.
Refit upper part of the vacuum
cleaner
SE 122