Operation; Hang Portable System In Wall Mounting - Weinmann LIFE-BASE 1 NG Instrucciones De Manejo

5. Operation

5.1 Hang portable system in wall mounting

Hang portable system
Bottom rail
Control pin
Catch
Catch
cross-bar
housing
Note
If you are using a protective bag, ensure that the
protective bag is properly located first.
1. To hang the portable system in the wall mounting,
place the portable system in the bottom rail.
Warning!
– Risk of injury from loose portable system!
An inadequately secured portable system may fall
off or be thrown around the vehicle.
– Ensure that you both hear and feel the catch
engage.
– Check that the red control pin is flush with the top
edge of the catch housing and does not protrude.
2. Swivel the portable system towards the wall until you
hear and feel the catch cross-bar engage.
Operation EN
21