Danfoss TP7000+RF Instrucciones Del Usuario página 13

To convert to Thermostat mode
GB
The TP7000 can be converted to control at a constant user selected
temperature, instead of following the set programme.
Press & hold
display changes to colon blinking &
default temperature (8°C).
Press
required.
!
NOTE: unit will remain in thermostat mode until the
buttons are pressed together again.
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can control at a constant low temperature while you are away on
holiday, returning to your programmed settings after a specified number of
days (maximum 99 days).
(If not already in Thermostat Mode, press
& hold
changes to colon blinking & 8°C).
Press DAY (display will show a suitcase
and :00).
Press + and - to enter number of days of
holiday (max.99).
Use and
temperature, if required.
When selected number of days have elapsed,
the unit will return to normal, controlling
according to your set programmes.
NOTE: Press
to exit holiday mode if necessary.
12
and
or to alter temperature as
and together until display
buttons to alter the constant
and
buttons together
together until
and