Troubleshooting/Repair - Nikon Forestry Pro Manual De Instrucciones

Troubleshooting/Repair

En
De
If your Nikon Laser Forestry Pro should require repair, please contact your local dealer for details regarding
where to send it. Before doing so, you are advised to consult the Troubleshooting Table below.
Fr
Es
It
Ru
No
Se
Fi
Nl
Dk
Ro
Pl
Hu
Cz
30
Symptom
Unit does not turn
• Depress POWER button.
on — LCD fails to
• Check and replace batteries if necessary.
illuminate
• Be sure that nothing, such as your hand or finger, is
Target range cannot
blocking the laser emission aperture and laser detector.
be obtained
• Be sure that the laser emission aperture and laser detector
are clean. Clean them if necessary.
• Be sure that the target shape and condition is appropriate
to reflect the laser beam.
• Replace battery.
• Be sure to hold the unit steady while depressing the
[- - -] ("Cannot
POWER button.
measure") appears
• Be sure the target is within measuring range (10-500m/11-
550 yards/33-999 feet)
• Be sure that nothing, such as leaves or grass, is between
Closer target cannot
the Nikon Laser Forestry Pro and the target.
be measured
Target beyond a
• Be sure that nothing, such as leaves or grass, is between
certain distance
the Nikon Laser Forestry Pro and the target.
cannot be measured
Check Points