Product Safety Information; Product Specifications - Ingersoll Rand 88V Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Grinders are designed for material removal or cutting off using a rotated abrasive
wheel, in accordance with the product specification table.
●
Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
● Do not attempt to disassemble the internal Speed Controller. It is available only as a
unit.
For additional information refer to Product Safety Information Manual Form 04584959.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Free
Speed
Model(s)
rpm
88V60P107M-EU 6000
88V60P109M-EU 6000
88V85P107M-EU 8500
88V60S106M-EU 6000
99V60P107M-EU 6000
99V60P109-EU 6000
99V60P109M-EU 6000
99V85P107M-EU 8500
99V45S106-EU 4500
99V60S106-EU 6000
99V60S106M-EU 6000
16573222_ed5
WARNING
Arbor Wheel
Size Type
5/8" - 11 27 and 28
5/8" - 11 27 and 28
5/8" - 11 27 and 28
5/8" - 11 6 and 11
5/8" - 11 27 and 28
5/8" - 11 27 and 28
5/8" - 11 27 and 28
5/8" - 11 27 and 28
5/8" - 11 6 and 11
5/8" - 11 6 and 11
5/8" - 11 6 and 11
Maximum
Wheel
Wheel
Diameter
Thickness
in. (mm) in. (mm)
7 (180) 1/4 (6)
9 (230) 1/4 (6)
7 (180) 1/4 (6)
5 (127) or 6 (150)
7 (180) 1/4 (6)
9 (230) 1/4 (6)
9 (230) 1/4 (6)
7 (180) 1/4 (6)
5 (127) or 6 (150)
5 (127) or 6 (150)
5 (127) or 6 (150)
EN
Guard Part
Number
88V60-106-7
88V60-106-9
88V60-106-7
--- 88V60-A216M
99V77-106-7
99V60-106-9
99V60-106-9
99V77-106-7
--- 99V60-216A
--- 99V60-216A
--- 99V60-216MA
EN-1