Declaration Of Conformity - Fiem MG50 Junior Special Manual De Uso

It is opportune to underline the following actions that can prejudge the conformity and moreover the product characteristics:
• incorrect electricity supply;
• incorrect installation or incorrect /improper use or not conforming to the instructions reported in the instruction book supplied with machine;
• replacement of its components with those not approved or adopted by the manufacturer, or replacement effected by unauthorized technical
service.
• WARNING: THIS EQUIPMENT MUST BE EARTHED
• ATTENZIONE: QUESTA UNITA' DEVE ESSERE CONNESSA A TERRA
• ATTENTION: CETTE UNITE' DOIT ETRE MISE' A LA TERRE
• ACHTUNG: DIESES GERAT MUSS EINEN ERDUNGSANSCHLUSS HABEN.
• ATENCION: ESTE EQUIPO DEBE ESTAR CONECTADO A UNA TOMA DE TIERRA.
• APPARATET MA KUN TILKOPLES JORDET STIKKONTACT. APPARATEN SKALL
ANSLUTAS TILL JORDAT NATUKKAT. LAITE ON LITTETAVA SUKO-RASIAAN.

DECLARATION OF CONFORMITY

Manufactured in the EU for:
THE MACHINE
MODELS
SERIAL NUMBER
REQUIREMENTS OF HEALTH AND SAFETY OF D.P.R. D.M. 17 of 27 January 2010
The metallic plate fixed on the machine is an integral part of the same;
all serial numbers, and product specifications are detailed on the plate.
THE FOLLOWING HARMONIZED RULES HAVE BEEN UTILIZED FOR THE CORRECT IMPLEMENTATION OF THE ESSENTIAL REQUIREMENTS OF
HEALTH AND SAFETY OF THE ATTACHED I.
• EN 55014-1:2006 + A1:2009 + A2:2011 • EN 55014-2: 2015 • EN 61000-3-3:2014 • EN 61000-3-3:2013
Guanzate
Correct working of the fan should be checked visually, faulty operation of the fan could compromise incubation results.
6
18
Incubatrici F.I.E.M. S.r.l.
Via G. Galilei, 3 - 22070 Guanzate (Como) - Italy
D E C L A R E S
Incubator
m MG50 J.S. - m MG 70/100 Family - m MG100/150 B.Family
IS MANUFACTURED AND SOLD IN CONFORMITY TO THE ESSENTIAL
Attachement I (implementation of the Machinery Directive 2006/42/EC)
, The Declarator
to senses of the attachment I, D.Lgs.17/2010/CE
T H A T