Connecting The Minibar Electrically; Mounting The Lock (Lock Version Only); Mounting The Lock (No Lock Version Only) - Dometic DM 50NTE Instrucciones De Montaje

DM50NTE
6.4

Connecting the minibar electrically

DM50NTE D/F UPOE
➤ Connect the Ethernet port of the minibar to an Ethernet port that works accord-
ing to the UPOE specification.
DM50NTE D/F without UPOE
➤ Plug the AC connection cable into the AC voltage socket and connect it to the
AC mains supply.
✔ The Power Status LED lights up.
✔ The lamp lights up and the minibar starts cooling the interior.
6.5 Mounting hotel's own door decor (DM50NTE F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 4 kg (8.8 lbs)
• Maximum thickness: 18 mm (0.7 in) (lock version only)
➤ Fasten the decor with four screws.
6.6

Mounting the lock (lock version only)

➤ Drill a hole with a diameter of 35 mm (1.38 in) into the decor.
➤ Mount the lock together with the lock decor.
6.7

Mounting the lock (no lock version only)

Disassembling the drawer (fig. a, page 8)
➤ Open the drawer completely (A).
➤ Press the rail lock (A 1).
➤ Pull the drawer out of the cabinet (B).
Only for DM50NTE D:
➤ Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
➤ Unscrew the two screws (C 2) of the door handle.
EN
Installation
19