Temperature Adjustment - GE Profile GXCF25FBS Manual Del Propietário

Care and cleaning of the dispenser.
Cleaning the Outside Cabinet and Storage/Chiller Compartment
IMPORTANT: Set both power switches (on the
back of the dispenser) in the O (off) position and
unplug the water dispenser before cleaning.
The cabinet and compartment of the
dispenser can be washed with mild soap and
water. Rinse thoroughly with clear water. Never
use commercial cleaners or abrasive scouring
powders.
Cleaning the Inside of the Chiller Compartment
To help prevent odors, leave an open box of
baking soda in the chiller compartment.
Unplug the dispenser before cleaning.
Use warm water and baking soda solution—
about a tablespoon (15 ml) of baking soda to
a quart (1 liter) of water. This both cleans and
neutralizes odors. Rinse and wipe dry.
Cleaning the Drip Tray and Grille
Drip
tray
The dispenser drip tray is not self-draining.
grille
To reduce water spotting or deposits, the tray
and its grille should be emptied, cleaned and
wiped dry regularly.
Drip
tray
Sweep away or vacuum any dust from the
condenser coils on the back of the unit. For
best results, use a brush specially designed for
this purpose. It is available at most appliance
stores.
Clean other parts of the chiller compartment—
including door gaskets and all plastic parts—
the same way.
Clean with mild soap or on the top rack in the
dishwasher.
5