Device Settings - Velleman MVR5 Manual Del Usuario

A-B Repeat
You can set the device to repeat a part of a track or recording.
The repeat function is not available for video files.
1. Make sure the device is in music playback mode.
2. Long press A-B to select the start point of A-B repeat
3. Long press A-B again to select the end point of A-B repeat.
4. To cancel the repeat function, long press A-B button.
5.5

Device settings

Accessing the system settings
To access system settings, you need to start the device in play
mode.
1. Set the Record/Play button [2] to play position (down)
Press and hold ►║ on the front panel to turn on the device.
2.
3. Press until System Settings appears.
4. Press [M] to enter the System Settings.
5. When done, long press [M] to return to the main menu.
Setting the language
1. Access the System Settings (see above).
2. Press to select Language and press [M] to confirm.
3. Press or
Memory Space Information
1. Access the System Settings (see above).
2. Press to select Memory Information and press [M] to confirm.
Disc D refers to the internal memory, Disc E refers to microSD
card.
3. Press [M] to exit.
Reset to factory settings
Restoring factory settings resets all default settings but does not
affect your files.
1. Access the System Settings (see above).
2. Press to select Factory Settings and press [M] to confirm.
3. Press to select Yes/No to reset to factory settings.
4. Press [M] to confirm.
Select the memory type
You can either use the internal memory or the microSD card
1. Access the System Settings (see above).
V. 01 – 24/01/2013
MVR5
to select the language and press [M] to confirm.
7 ©Velleman nv