Multiparty Or Conference Calls - LG G1500 Manual De Usuario

In call Menu
Additional Functions

2 Multiparty or Conference Calls

The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature.
A multiparty call can only be set up when you have one active call
and one call on hold, both calls having been answered. Once a
multiparty call is set up, calls may be added, disconnected or
separated (that is, removed from the multiparty call but still
connected to you) by the person who set up the multiparty call.
These options are all available from the in-call menu and are listed
in Section.
The maximum callers in a multiparty call is five. Once started, you
are in control of the multiparty call, and only you can add calls to the
multiparty call.
2-1 Making a Second Call
You can make a second call while you are already in a call. To do
S
this, enter the second number and press [Send]. When you get
second call the first call is automatically put on hold. You can swap
<
between calls by selecting the [Options] key then Swap.
2-2 Setting up a Multiparty Call
You can connect a call on hold to the currently active call to form a
<
multiparty call by selecting the [Options] key then
Multiparty/Join all.
2-3 Putting the Multiparty Call on Hold
<
To put a multiparty call on hold, select the [Options] key then
Multiparty/Hold all.
2-4 Activate the Multiparty Call on Hold
<
To make a multiparty call on hold active, select the [Options]
key then Multiparty/Join all.
80