Truma DuoComfort Instrucciones De Uso Instrucciones De Montaje página 15

Du oC om for
t
If a limited amount of height
is available in the cylinder box,
we recommend attaching the
DuoComfort changeover valve to
the top of the cylinder box using
an angle union, for example
(part no. 50020-56000).
Male threads M20 x 1.5 (G.13)
connect the inlet side of
DuoComfort to the high pressure
line; a nut M20 x 1.5 (G.13)
connects the outlet side of
DuoComfort to the low pressure
regulator.
When using outdoors, use a
protective hood or similar de-
vice to protect the regulator
and changeover valve from the
elements.
– Choose a suitable position for
the regulator, in particular: the
type plate is visible, the status
display can be clearly seen,
avoid damage when changing
cylinders, thwart penetration
by gas in the liquid phase,
plan for a place to add the
Truma remote display, avoid
tension in the high pressure
hoses.
– Pull the retaining lug for the
dummy cover over the outlet
of the changeover valve.
Duo Com fort
15