AGPtek M6 Manual De Usuario página 12

-
"Bookmarks". Choose to add, delete or go to bookmark.
-
"Variable Speed". Set the speed of playing music.
-
"Repeat settings". Choose A-B repeat settings and set replay times and interval.
-
"Delete". Choose to delete the song that is playing now.
-
"Add to playlist"/"Remove from playlist". Choose to add to or remove from the 3 playlists.
FM Radio
Find "FM radio" on main menu with the button
While it's on radio playing interface, click
Start FM recording, Presets, Save to preset, Clear preset, Auto tune, Turner Region and FM
Recording.
 Auto tune/save to/Clear preset
-
"Auto tune". Search stations automatically. You can see the searched stations in "Presets".
While is on radio playing interface, click
pause/resume the radio.
-
"Save to preset". Save the station you are listening to "Presets" list.
-
"Clear preset". Click "Clear preset" to enter the Presets, choose the station you want to clear,
then click and choose "yes" to clear the preset station.
 FM recording. Choose "Start FM Recording". Click button
and select "yes" to save the recording file.
Find the radio recordings in FM radio > FM recording. The radio recordings will also be saved
in Recording > Recordings library.
 Turn off radio background. While it's on radio playing interface, click
turn off the radio playing background.
Note 1. When using the radio function for the first time or when there is no station, the station can
be added by [Station list], [Manual Tune], [Auto Tune].
Note 2. The FM radio does not support playback by Built-in speaker. There is no built-in antenna.
So it is necessary that the wired earphones or antenna connect to the 3.5mm port for
receiving signals.
Note 3. FM radio supports listening with the wired earphones connection.Wired earphones
listening: Before turning on the FM radio, you should connect to the wired earphones
without wire control for listening.
to enter to its function.
to access to its submenu which includes: Home,
/ to switch among preset stations. Press
10
to pause/continue, click
and choose "Yes" to
to