Maintenance; Periodic Maintenance; Replacement Parts - Spirotech SPIROVENT SUPERIOR S400 Manual Del Usuario

8

MAINTENANCE

8.1

Periodic maintenance

1. With every periodic inspection, check the float valve
(31) by removing some water from the break tank
(30), or by a short push on the float of the float
valve (31). If necessary clean the inlet filter of the
float valve (31).
2. Inspect and clean the filter element (24) regularly.
3. Replace the automatic air vent (8) every two years.
8.2

Replacement parts

The number indications correspond with the main figures
in § 2.1.
Main item
Pump
Cover
Control unit
Cables
Break tank
Automatic air vent
Inlet
23
Spare part
3 Pump, 50Hz
3 Capacitor, 50Hz
3 Seal set
25 Cover S400
5 Control unit Power Box
22 Control unit (HMI)
- Connector for control unit Power Box
- WiFi dongle (USB)
- Fuse set:
- Solenoid fuse 20x5; 2,5AT (10 pcs)
- Pump fuse 20x5; 10AT (10 pcs)
- Mains supply fuse 20x5; 1AM (10 pcs)
- Cable set - basic cable harness
- Cable set - additional cable harness refill
30 Break tank assembly
31 Float valve
32 Float switch
8 Automatic air vent
9 Check valve including O-ring, air vent
7 Smart Switch
24 Filter element
23 Inlet flow limiter
21 Pressure sensor
21 Pressure sensor spacer
20 Solenoid valve - internal parts
20 Solenoid valve - coil
4. Replace the interior of the solenoid valve (22) every
year.
5. Always fix the vapor-tight insulation after
maintenance.
NOTE
Proper and regular maintenance will
•
ensure correct functioning of the unit
and maximize the life time expectancy
as well as a trouble free operation of the
unit and system.
/i
English
Article number
R61.418
R61.632
R61.631
R72.540
R61.628
R61.629
R61.471
R61.526
R61.529
R61.630
R61.440
R73.563
R73.262
R73.359
R73.287
R61.417
R61.531
R73.207
R73.217
R61.412
R73.367
R61.532
R10.343
User manual - 1.0