Dea GULLIVER Instrucciones De Uso Y Advertencias página 26

8 Adjustment of operating parameters
If you need to modify the operating parameters (force, speedness
etc..):
1. Scroll down the parameters until you visualize the desire param-
eter (i.g. P032);
2. Confirm by pressing on the
3. By pressing on and
4. Confirm by pressing on the
previously selected).
For the complete list of the "Operating Parameters" See the
table on page. 30.
9 Programming complete
WARNING At the end of the programming procedure, use the buttons
is now ready again for new manoeuvres.
To perform any "Advanced Programming" operations (cancellation of the remotes, configuration inputs, etc. ..), see on page 25.
24
key;
, set up the desired value;
key (display shows the parameters
and until the appearance of the symbol "- - - - ", the operator