Installation - Miele ESS 2060 Instrucciones De Manejo

The drawer must be fitted above a
fixed interim shelf in the housing unit
to ensure that the housing unit can
support both its weight and that of
any other appliance installed in
combination with it.
When fitted in combination with
another appliance, the drawer must
always be fitted underneath the
other appliance.
As the combination appliance is
placed directly on top of the drawer
once it is built in, an interim shelf is
not necessary between the two
appliances.
^ Push the drawer into the housing unit
as far as it will go, and align it.
Ensure that the housing unit is
aligned at a right angle.
^ Open the drawer, and use 2 screws
to secure the drawer to the side walls
of the housing unit.
^ Build in the combination appliance in
accordance with its own specific
operating and installation
instructions.

Installation

45