I can't connect special applications.
Possible Solution: If you have the U.S. Robotics
Wireless Gateway properly connected and can access the Internet but are
experiencing difficulties connecting with special applications (e.g., ICQ,
Battle.net, etc.), you must assign specific ports in order to bypass the
firewall function. For more information about how to configure this
function, refer to the User Guide located on the Installation CD-ROM.
While trying to check my network configuration settings in Windows Me or XP, I
can't find the Network icon.
Possible Solution: The default setting in Windows Me and XP is to not show
all of the icons within the Control Panel. Click Windows Start, Settings, and
then Control Panel. Within Control Panel, click View all Control Panel
options on the left side of the screen. All of the Control Panel icons should
now be visible.
I don't know how to configure the TCP/IP protocol to work with the gateway.
Possible Solution: You may be able to resolve this problem by opening the
Help menu in your operating system. Check the help messages for TCP/IP.
While trying to surf the Internet, I received a "Page Not Found" or similar error.
Possible Solution: Check if your computer has acquired an IP Address from
the gateway. If not, try to release/renew the IP Address. Refer to the User
Guide on the CD-ROM for more information.
Possible Solution: Check if your gateway received an IP Address from your
Internet Service Provider (ISP). Refer to the Ping Procedure in this guide.
For additional information, refer to the User Guide on the Installation CD-
ROM.
My wireless connection can not access the Internet.
Possible Solution: Verify that the client is correctly installed, configured,
and can see the gateway.
Possible Solution: Go to the EasyConfigurator Wireless page and verify that
wireless is enabled and working properly.
Possible Solution: Review the Troubleshooting Checklist at the beginning
of this section and verify that the ADSL connection is working.
14
SureConnect
ADSL
14