Beep Codes - Dell Precision T3400 DCTA Guía De Referencia Rápida

Light Pattern

Beep Codes

Your computer may emit a series of beeps during start up. The series of beeps
is called a beep code and can be used to help identify a problem with your
computer.
If your computer emits a series of beeps during start-up:
1 Write down the beep code.
2 Run the Dell Diagnostics to identify the cause (see "Dell Diagnostics" on
page 41).
Code
2 short, 1 long
1 long, 3 short, 2 short Memory error
1 short
Problem Description
Another failure has
occurred.
Cause
BIOS checksum error
F12 key pressed
Suggested Resolution
• Ensure that all hard drive and
CD/DVD drive cables are properly
connected to the system board (see
"System Board Components" in your
User's Guide).
• If there is an error message on the
screen identifying a problem with a
device (such as the floppy drive or
hard drive), check the device to make
sure it is functioning properly.
• If the operating system is attempting
to boot from a device (such as the
floppy drive or CD/DVD drive), check
system setup (see "System Setup" in
your User's Guide) to ensure the boot
sequence is correct for the devices
installed on your computer.
• If the problem persists, contact Dell
(see "Contacting Dell" in your User's
Guide).
Quick Reference Guide
37