Chronograph Reset (Inc. After Replacing Battery) - Festina IFM0S62 Manual De Instrucciones

CHRONOGRAPH RESET (Inc. after replacing battery)

This procedure should be perfomed when the chronograph second hand and
chronograph 1/20 (1/1) second hand do not return to the ZERO second position after
the chronograph has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd Click Position.
2. Press button "A" to set the chronograph second hand to the ZERO position.
3. Press button "B" to set the chronograph 1/20 second hand to ZERO position.
The chronograph hands can be advanced rapidly by continuously pressing button
"A" or "B".
4. Once the hands have been zeroed, reset the time and return the crown to its
normal position.
5. Press button "B" to check that the chronograph hands are reset to the ZERO
position.
Do not return crown to the normal position while chronograph second hand and
*
1/20 chronograph second hand return to ZERO position.
Each hands stop on the way when crown are returned to normal position and t h e s e
positions are recognized as ZERO position.
IFM0S62
18
IFM0S62
CHRONOGRAPH RESET (Inc. after replacing battery)
By virtue of the regulations pursuant to the handling of waste
products deriving from electronic and electrical equipment, end of
lifecycle watch making products must be selectively collected for
processing. You may therefore dispose of your quartz watch making products at
any of our retail outlets or any other authorized collection point. The selective
collection, processing, rating and recycling of these products helps contribute to
safeguarding the environment and protecting our health.
19