Using The Chronograph - Festina IFM0S62 Manual De Instrucciones

USING THE CHRONOGRAPH

This cronograph is able to measure and display time in 1/20 (1/1) second united up to
max 11 hrs 59 min 59 sec.
The retrograde chronograph 1/20 (1/1) second hand keeps continuously for 60 seconds
after starting, and then stops at ZERO position.
[Measuring time with the chronograph]
1. Press button "B" to change the watch to the chronograph mode.
The second hand stops at the ZERO second position, and changes to the
chronograph 1/20 (1/1) second hand.
2. The chronograph can be started and stopped each time button "A" is pressed.
The chronograph 1/20 (1/1) second hand stops at the ZERO second position 60
seconds after starting.
When the button "A" is pressed to stop the chronograph, the chronograph
1/20 (1/1) second hand advances rapidly to display the measured time.
IFM0S62
16
IFM0S62
USING THE CHRONOGRAPH
3. Pressing button "B" resets the chronograph and all hands return to their
ZERO positions.
* Moving of the retrograde chronograph is a demo.
Actual measurement will be shown when it stopped/STOP button is pushed.
RESET
MEASUREMENT
TIME
STOP
17