Clatronic AR 736 Instrucciones De Servicio página 75

• Press the 4RDM button. The CD tracks are played
at random. Press this button again to cancel this
function.
18. REC/ TA • COPY Button
a) TA Traffi c Announcement
(Priority for Traffi c Information)
The TA function is activated by pressing the REC/TA
• COPY button briefl y. The TA symbol appears in the
display.
If an FM station is being received which transmits the
latest traffi c announcements from time to time, the TP
display lights up.
When the TA function is switched on, the FM traffi c
announcements automatically interrupt CD operation
(The word TRAFFIC INFO appears in the display).
After the traffi c announcement has fi nished, the
programme that was previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current traffi c announce-
ment, press the REC/TA • COPY button briefl y. This
does not switch off the TA mode.
Note: If no traffi c information is being received, „LOST
TP TA" appears briefl y in the display.
b) Recording function
(only available during CD operation)
It is possible to record from CD/MP3 CD to USB.
1. To this purpose connect a USB storage medium
using an adapter cable to the corresponding
connection (21).
2. With the I / I
you would like to record.
3. Keep the REC/TA • COPY button pressed down
(The letters REC
4. Press the multifunction button (2) to confi rm.
Recording of the current track on the USB storage
medium begins (The letters REC >>>> appear in
the display).
Note: In the case of MP3 CDs the copying status is
indicated by a percentage. In contrast, in the case of
audio CDs the recording is performed in real time.
5. Once recording has fi nished, „100%
in the display in the case of MP3 CDs, „REC
the case of audio CDs. The device then returns to
normal playback.
Note: It is always only possible to record the current
track (not an entire CD). In order to record a further
track on the USB storage medium, please proceed as
described above.
19. PTY/IX-BASS Button
a) Switching the IX-BASS function on and off. Keep the
PTY/IX-BASS button pressed down fur approximately 3
seconds.
05-AR 736 CD_MP3_NEU 75
buttons (7/8) select the track
USB appear in the display).
" appears
" in
When the volume is low the IX-BASS function expands
the sound characteristics by increasing the treble and
bass sounds.
b) Radio Operation:
PTY Selection of the Programme Type
Besides the station name, some FM stations also
transmit information on the type of programme. This
information can be displayed by your car radio.
Examples of such types of programme are:
SPORT NEWS
With the PTY function you can specifi cally select
stations transmitting a particular type of programme.
Press the PTY/IX-BASS button repeatedly to access the
PTY selection. Confi rm your selection with the multi-
function button (2). „PTY SEEK" then appears briefl y in
the display.
When PTY has been selected the radio starts searching
for corresponding PTY information and stops when the
PTY information has been found.
If the programme type being searched for is not found,
„NO MATCH PTY" appears in the display.
If the PTY information being searched for no longer
exists, the PTY function automatically switches to
normal mode.
20. AF Button
AF (Alternative Frequencies) REG Function
AF is a function that works with the help of RDS (Radio Data
System) and can only be used with FM stations. The radio
searches in the background for the best frequency reception
of the station that has been tuned into.
If the AF function has been switched on, the radio conti-
nuously tests the signal strength of the AF frequency. The
test interval for each AF frequency depends on the signal
strength of the current station and varies from a few minutes
in the case of a strong signal to a few seconds in the case of
weak signals. Whenever the new AF frequency is stronger
than the station that is currently tuned in, the radio switches to
this frequency for a short time and the message „NEW FRE-
QUENCY" is displayed for one to two seconds. As the mute
time during the frequency change and the test time is very
short, this is almost inaudible during the normal programme.
The AF function is activated by briefl y pressing the A.F but-
ton and the status of the AF function is shown in the display
by an AF symbol.
• If the AF symbol appears in the display, the AF function
is switched on and RDS transmission data is being
received.
• If the AF symbol fl ashes in the display, the AF function
is selected but no RDS signal can be received at the
moment.
• Press the A.F button again to switch off this function.
The AF symbol in the display goes off.
POP CLASSICS
75
18.09.2006, 11:02:24 Uhr