DAB RADIO
When the radio is switched on for the first
time, it will automatically do a full scan of
DAB/DAB+ stations. The list of stations is
then stored, eliminating the need for an-
other full scan when the radio is turned on
next time.
When the scan is complete, the stations
are stored in alphabetical order. The first
available station will be played back.
Note
If there is no DAB reception at any time,
change the position of the unit or adjust
the antenna. Press Scan to start a new
search.
CHANGING DAB/DAB+ STATIONS
1. Press TUN/CH in DAB mode to navi-
gate available DAB/DAB+ stations.
2. To confirm, press the turning knob
VOLUME/SELECT.
STORING DAB STATIONS
Press and hold the button MENU/INFO
in DAB mode until "Full scan" appears on
the display. Press VOLUME/SELECT to
confirm.
The unit scans all available DAB/DAB+ sta-
tions and plays the first available station.
Note
New stations and services are added to
the stored DAB/DAB+ stations. In order
to make new DAB/DAB+ stations and ser-
vices available on your radio, run a full scan
at regular intervals.
_PDR110BT-B_160225_V05_A_HR.indb 33
DISPLAYING STATION INFORMATION
1. Select a DAB station.
2. During DAB/DAB+ radio playback,
press INFO repeatedly to display the
following information (if available):
• Ensemble
• Frequency
• Signal frequency error
• Audio state and bit rate
• Time
• Date
• Radio text
• Signal strength
• Programme type
STORING DAB STATIONS
You can store up to 10 preset DAB/DAB+
stations.
1. Select the desired station.
2. Press and hold PRESET until "Save to
P#" flashes on display.
3. Press TUN/CH to preset a number
from 1 -10. Press VOLUME/SELECT
to confirm the selection.
4. The preset number of the stored sta-
tion is displayed.
5. Repeat steps 1 to 4 to store more
DAB/DAB+ stations.
SELECTING PRESET DAB STATIONS
1. Press MODE to select the DAB/DAB+
mode.
2. Press PRESET to access the Preset
menu.
3. Use TUN/CH to select a preset num-
ber and confirm your selection by
pressing VOLUME/SELECT.
ENGLISH
33
25/2/16 7:27 PM