Description Of The Ads Ip Interface - Fermax IP ADS Manual De Instalador

Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS
Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS

Description of the ADS IP Interface

Buttons:
Restore Default: Returns to factory values (configuration of network, ADS number, users...).
Reset: Restarts the equipment.
LEDs
POWER Equipment powered
LAN Network connection available
PRG Accepts programming of ADS address
CH ADS video channel 1 active
Connections:
ADS busbar:
L: Audio and data busbar.
+, -: 18 Vdc power supply.
Video:
CH1+: ADS channel 1 video input (connection of live).
CH1-: Earth of ADS channel 1 video (connection of the mesh).
CH2+: Channel 2 auxiliary video input (connection of live).
CH2-: Earth of channel 2 auxiliary video (connection of the mesh).
Inputs/outputs (configurable by means of the ADS IP application):
DI+: Positive digital input.
DI-: Reference digital input
DO, DO: Dry contact of relay.
Ethernet network/Internet connection:
LAN: Connection to ethernet network/Internet (RJ45
POWER LAN
Restore Default Reset
Configuración
Fábrica
INTERFAZ IP ADS
ADS IP INTERFACE
REF. 1304
INPUT
18V 500 mA
-
DO DI
LAN
(Press and hold the button for about 5 seconds).
On
+ -
CH2
PRG CH
+ - + - + L
CH1 PWR
Off
Equipment not powered
Network connection unavailable
Standby
Auxiliary video channel 2 active
Page 7