Functioning - Fermax IP ADS Manual De Instalador

Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS
Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS

Functioning

Answering a call.
When a call is received from the outdoor panel or from the reception centre, the computer
generates a call sound. If the call comes from an outdoor video-intercom panel, the
video from that screen will appear on the screen of the application.
If the application is minimised, it is automatically restored.
To establish communication with the outdoor panel or the reception centre, click on the
button.
(you need to have headphones/speakers and a microphone connected to the PC in order to
have audio in the communication).
Opening the door.
When you are in communication with the outdoor panel, press the
the door.
Calling the ADS reception centre.
To make a call to the recepton centre, if there is one in the installation, press the
button.
Auto-start.
From the application, it is possible to establish communication with the outdoor panels,
without having to receive a call:
- Press the
- Press the
Note: If audio communication is not established, the image is seen for 30 seconds.
Press the
Note: Once the communication has been activated, Audio and Video will remain active
for 90 seconds, after which they will automatically disconnect.
Press the
Visualisation of auxiliary camera.
Press the button to see the image from the auxiliary camera, if there is one.
Activation of DO output.
Press the
Image and Video Capture
Click on to record a video or
(main or secondary panel camera or auxiliary camera).
Press the
video, double-click on the file in the list.
Page 28
button to see the image from the main panel.
button to see the image from the secondary panel.
button to establish audio communication with that outdoor panel.
button to open the door.
button to activate the interface's DO output.
button to show the list of images and videos captured. To see the image or
to capture the image from the selected camera
button to open