Fermax IP ADS Manual De Instalador página 44

Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS
Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS Interfaz IP ADS
Connection of auxiliary device, Input/Output
The ADS IP interface has an input (terminals DI+, DI-) for the reception of alarms and an
output (terminals DO, DO)
or as a response to the reception of an alarm through the DI input.
The operating mode of this input and output is configured through the ADS IP application
(see "ADS IP user application" section).
DI input:
- Input Normally Open (N.O.)
- Makes it possible to program the continous detection time until the DO output is
triggered.
- Makes it possible to activate/deactivate the input.
DO Output:
- Permits Normally Open (N.O.) or Closed (N.C.) configuration.
- Permits programming of the activation time.
- Manual activation by means of the ADS IP application.
- Makes it possible to activate/deactivate the output.
Connection diagram
INTERFAZ IP ADS
ADS IP INTERFACE
REF. 1304
LAN
Page 10
for the activation of external devices using the ADS IP application
POWER LAN
Restore Default Reset
Configuración
Fábrica
DO DI
-
+
Power source with sufficient
ouput voltage and amperage
to activate the auxiliary
device.
PRG CH
CH2 CH1 PWR
- - - L
+ +
A u x i l i a r y
device
Detection element