Requirements For The Set-Up Location; Installation Under A Wall Cupboard - Silvercrest SKR 800 B2 Instrucciones De Uso

Requirements for the set-up location

For the safe and trouble-free operation of the device, the set-up location must
fulfil the following requirements:
■ When setting up the device, place it on a firm, flat and horizontal surface.
Use the fold-out adjustable foot
■ The surfaces of some items of furniture might contain components that can
corrode and soften the rubber feet of the device. If necessary, place a mat
under the device's rubber feet.
■ Set up or mount the device in such a way that the provided ventilation
openings and speakers
■ Do not operate the device in a hot, wet or extremely damp environment or
near flammable materials.
■ The mounting location must be selected so that the device is not exposed to
vapours. Do not install the device directly over a hotplate.
■ The mains socket must be easily accessible so that the plug can be easily
pulled out in an emergency.

Installation under a wall cupboard

Using the supplied mounting plate
a wall cupboard. Proceed as follows to mount the device:
♦ Slide the mounting plate to the rear and remove it from the device.
♦ Find a suitable installation location for the device (see also the section
"Requirements for the set-up location").
SKR 800 B2
.
are not covered.
, you can install the device, e.g. under
3,1 cm
6,3 cm
GB │ IE │ 31 ■