Stihl MS 381 Manual De Instrucciones página 65

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A
A
Direction of fall
B
Escape path (or retreat path)
Establish paths of escape for
everyone concerned – opposite to
direction of fall at about 45°.
Remove all obstacles from escape
paths.
Place all tools and equipment a safe
distance away from the tree, but not
on the escape paths.
Always keep to the side of the falling
tree and only walk away along the
preplanned escape path.
On steep slopes, plan escape
routes parallel to the slope.
When walking away along the
escape path, watch out for falling
limbs and watch the top of the tree.
MS 381
Preparing work area at base of tree
First clear the tree base and work
area from interfering limbs and
brush to provide a secure footing.
Clean lower portion of tree base
(e.g. with an axe) – sand, stones
45°
and other foreign objects will dull the
saw chain.
45°
Make the vertical cut first, then the
horizontal – but only if the wood is
sound
Felling Notch
Preparing felling notch
C
C
The felling notch (C) determines the
direction of fall.
Important:
Make felling notch at a right angle to
the planned direction of fall.
Cut close to the ground.
Cut to a depth of about 1/5 to 1/3 of
the trunk diameter.
English
63

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido