Before Each Drying - EAS ELECTRIC EMTD9PZ Manual De Usuario

OPERATION

Before Each Drying

Note!
• Leave it to stand for 2 hours after transporting. Before first use, please use
the soft fabric to clean the inside drum. .
1. Put some clean rags into the drum.
Plug the power, press 【On/Off 】
2.
Select the 【Refresh】 Programme, press 【Start/Pause】 button
3.
4. After finishing this programme, please follow the "cleaning and care "
(refer to page 24) to clean the filter door.
• During drying, the compressor and the water will generate some noise
which is entirely normal.
1.Before drying, thoroughly spin the laundry in washing machine. High spin speed
shortens the drying time and saves energy.
2.For uniform drying result, sort the laundry according to fabric type and select the
appropriate drying programme.
3.Before drying, please close zips, hooks and eyelets, button, tie fabric belts, etc.
4.Remove all objects from pockets such as lighters and matches.
5.Sew in or remove underwiring from bras.
6.Close duvet covers and pillow cases to prevent small items from being rolled up
inside them.
7.Leave jackets open and undo any long zips so that textiles dry evenly.
8.Do not over dry the clothes, because over dried clothes can easily get creases.
9.Do not dry the articles containing rubber or similar elastic materials.
10.Keep the area around the tumble dryer clean. Coal dust or flour may cause an
explosion.
11.The door shall be opened only after the programme of the tumble dryer is finished
to avoid being scalded by hot steam or over heated drying machine.
12.Clean the lint filter and empty water container after each use to avoid extension of
drying time and increase of energy consumption.
13.Do not dry clothes after dry-clean process.
.
13
.
V.1