12.4
Air filter
Loosen the right maintenance door screws and
remove the cover
Loosen the air cleaner case screws and remove
the air cleaner case
Remove the air cleaner
Clean the air filter with soapy water, then rinse
with clear water and let it dry thoroughly before
reassembling
Reassemble the air cleaner in reverse order
12.5
Spark plug
Open and lift away the left top cover
Remove the spark plug cap
Loosen the spark plug using the spark
plug socket.
Visually inspect the spark plug
Remove carbon deposits with a copper
wire brush
Check electrode gap (0,6 -0,7mm)
Reassemble the spark plug in reverse
order
12.6
Transport
Secure the machine to prevent slipping
Do not let the fuel spill out of the fuel tank.
When the generator is placed on vehicle, the engine may not run.
During transport, protect the machine from excessive heat. If longer periods in an enclosed
vehicle the fuel may ignite due to overheating.
12.7
Storage
If the machine is stored for longer than 30 days:
Wait until the engine cools down sufficiently.
Allow the fuel from the tank into a suitable container (or let the machine run till it stops itself)
and store the drained fuel in a suitable container.
Clean and dry machine
Store in a dry, out of reach of children place
Cover the machine well and store it in a dry and clean place.
12.8
Disposal
Do not dispose the machine, machine components fuel and oil in residual waste. Contact
your local authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to exchange your old.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-STE3000IV
MAINTENANCE
0,6-0,7mm
26