Note:
•
When t
he sensors are successfully connected, Cardio 35 will release a short beep
and the LED indicators (on the top of the icons) will blink for 5 seconds.
•
Once connected, the sensor ID will be displayed on the screen.
For example:
Heart Rate sensor
Press button
2
to confirm and move to search next item. If you do not want to
connect the current detected sensor, press button
•
Be sure to keep the distance between the similar sensors approximately 30 meters.
•
If you see below illustration on the screen, this indicates that there are more than 2
sensors are detected. Press button
20
(Current heart rate and sensor
ID is display)
1
to abort.
1
to rescan the sensor.
Current data
Sensor ID