Num'axes PIE1023 Manual Del Usuario página 16

Cam
Settings
Camera ID
Camera Mode
LED
Photo Resolution
Night Mode
Multi shot
Video Resolution
Video Length
Cam PIR
PIR Sensitivity
PIR Interval
Time Lapse
Working timer
Exit
MENU
PIR
Settings
Sensitivity
PIR Interval
Time Lapse
PIE1023 - Indice A
Programmable options (default settings in bold characters)
ON / OFF
Select "ON" then press "OK" to set an ID number for the camera (4 digits). Such function can help the
user to identify from where and from which camera the photos are.
Photo / Video / Photo + Video
− Photo: camera shoots photos only based on configured "Multi-shot" and "Image resolution"
settings.
− Video: camera shoots videos only based on configured "Video length/Resolution" settings.
− Photo + Video: camera shoots photo(s) first, then video upon same trigger event based on
configured "Video length/Resolution" and "Multi-shot/Image resolution" settings.
All / Part
− All: all 58 IR LEDs will work in dark environment.
− Part: bottom 30 IR LEDs will be turned off.
12MP / 8MP / 5MP
Maximum range / Balanced / Minimum blur
− Maximum range: longer exposure time to extend IR flash range for better night vision, lower quality
image.
− Minimum blur: short exposure time to minimize motion blur for better image quality, shortened IR
flash range.
− Balanced: Combination of the above 2 options.
1 photo / 2 photos / 3 photos / 4 photos / 5 photos
Programmable – 1 to 5 photos per trigger
FHD – 1080P / HD – 720P / VGA
05-59 seconds
3G Other
OFF
OFF
OFF
Set
OK
Programmable options (default settings in bold characters)
High / Medium / Low
High sensitivity 1) is more sensitive to movements by smaller subjects; 2) offers longer detection
distance; 3) makes it easier for sensor to detect difference between body heat and outdoor
temperature; 4) makes it easier to trigger camera to record.
In high temperature environment, body heat of subjects and environment temperature are hard to tell
by camera, the suggested setting is high.
It is recommended to use low sensitivity for environments with lots of interference like hot wind,
smoke, near window, etc.
OFF / ON
Select "ON" then press "OK" to set the time interval that you desire between photos/videos upon
motion. This option avoid camera taking to many photos or videos.
Example: if pre-set PIR interval is 00:01:00, camera will wait 1 minute between photo/video recordings
with motion.
Configurable PIR Interval: 00:00:05 to 23:59:59.
NOTE: please don't turn "ON" Time Lapse and PIR Interval simultaneously.
OFF / ON
16/56