Num'axes PIE1023 Manual Del Usuario página 18

Ocultar thumbs Ver también para PIE1023:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

FTP
Recipients
SIM PIN
SMTP/FTP Photo size
Sendings/Day
SMS Ctrl
Daily Report
PIE1023 - Indice A
Camera comes with default SMTP setups; you only need to enter receiving email accounts in
"Recipients" setting.
Please finish setups below if you'd like to use your own SMTP server.
− Enter you mailbox server IP.
i.e.: Hotmail IP : smtp.live.com / Gmail IP: smtp.gmail.com
− Enter your mailbox port.
Port of most mailboxes is 25.
− Enter your mailbox password access.
NOTE 1: SMTP only send photos to pre-set emails; if SMTP is with wrong information entered, then
emails will not be able to receive photos from camera.
NOTE 2: MMS stops sending photos to email when SMTP is set to work.
ON / OFF
− Enter your FTP server IP.
i.e.: FTP Server IP: ftp://dianwan2008.gipc.net/ - Enter: dianwan2008.gipc.net
Gmail IP: smtp.gmail.com
− Enter your FTP server port.
Port of most FTP servers is 21.
− Enter your FTP server password access.
NOTE: FTP only upload photos to pre-set FTP account; if FTP is with wrong information entered, then
FTP account will not be able to receive photos from camera.
Cell phone numbers / Email addresses
Cell phone numbers: enter recipients' phone number (1 or 2)
Email addresses: enter recipients' email address (1 or 2)
You can ignore description below if your SIM has been activated already.
Phrase "Pls input PIN-Code" will not pop up on the screen after signal search if your SIM is activated.
− Camera will check if inserted SIM card is activated during signal search in SETUP mode.
− If SIM is not activated, "Pls input PIN-Code" will pop up on the screen after search signal.
− Then "SIM PIN" setting will turn to be configurable in "3G" page of menu.
− Enter PIN code in "SIM PIN" setting; camera will auto power off. When you restart the camera
after entering the PIN code, camera will activate SIM card automatically during signal search.
NOTE:
− "Pls input PIN-Code" will pop up again if wrong PIN code is entered.
− Please re-try your PIN code if you see "Pls input PIN-Code" after signal search.
− SIM is normally limited to be activated 3 times; it'll be locked if PIN codes entered are all wrong
during these 3 attempts. So we suggest you to double confirm your PIN code before you try
again.
− Please insert SIM card into your phone to unlock it by using its PUK code after 3 attempts of
activation based on steps above.
640x480 (S = small size) / 1920x1440 (L = large size)
Pictures sent via SMTP and FTP are in optional size as 640x480 or 1920x1440.
NOTE:
− Camera will only send photos to pre-set phone numbers via MMS.
− Camera will only send photos to pre-set email(s) via MMS if SMTP is not configured.
− Camera will only send photos to pre-set email accounts via SMTP (GPRS) if SMTP is set.
Unlimited / 01 – 99
Example: if user chooses 50, then camera will only send 50 pictures every day. All the rest of the photos
will only be stored in SD card.
By Trigger / All The Time
− By Trigger (suggested for AA battery power): camera will only be able to change and save setups
remotely when camera is triggered to shoot photos/videos.
− All The Time (suggested when using power adaptor as this option will consume huge battery
power): camera GPRS module is in stand-by all the time; so camera setups can be changed and
saved whenever you sent the remote SMS setup commands.
OFF / ON
If you want to receive a daily report, choose ON to enter then set up a time when you want the camera
18/56

Publicidad

Tabla de contenido
loading

Tabla de contenido