Nuvoair AIR NEXT Manual Del Usuario página 10

AIR NEXT TESTS
PARAMETERS SUCH AS:
EN
(Forced Expiratory Volume
FEV1
in 1 second) The volume of air (l)
exhaled in the first second during
a forced maximal expiratory effort
after a full inspiration.
(Forced Vital Capacity) The
FVC
total volume of air (l) exhaled dur-
ing a forced maximal expiratory
effort after a full inspiration.
(Ratio) The calculated
FEV1/FVC
result obtained by dividing FEV1
with FVC.
(Peak Expiratory Flow) The
PEF
maximum flow rate (l/s) during a
forced maximal expiratory effort
after a full inspiration.
The final results displayed in the
application are always the best
values obtained after performing
the desired number of tests
included in a session. The rec-
ommended number of tests per
session is 3, however the user can
perform up to 8 tests.
Displayed test are compared to a
reference table (GLI) and displayed
as percent predictive value (%pred.).
The reference used in Air Next
uses expected normal lung func-
tion values such as for FEV1,
FVC, FEV1/FVC and PEF are based
on ethnicity, gender, age and height.
Interpretation of spirometry results
should be made by a physician
or allied health care professional
with suffcient training in the
performance and interpretation of
spirometry.
Note: Home use of Air Next is in-
tended only for indicative purpose.
Interpretation of the test results
and diagnosis shall be done by a
healthcare professional.
MAINTENANCE
Handle Air Next device carefully.
Store it in clean and moisture free
10
conditions. Before use, always check
that the device is free from dust,
contamination or any particles.
Air Next does not require profes-
sional maintenance. If, however,
the outside of the device needs
to be cleaned make sure to only
use a damp cloth without any
detergents.
If the batteries are replaced or
when the device is discarded,
dispose the device as electronic
waste. The batteries of Air Next
are replaceable.
ACCESS TO BLUETOOTH
Enable Bluetooth on your mobile
device in order to pair with the
Air Next. You can enable Bluetooth
in your mobile device settings.
Check your device manual on how
to do this.