Improper Use; Intended Use; Unpacking / Assembly - AL-KO TOP 1202 H Manual Del Usuario

Symbols
On the machine
Before switching on the ma-
chine, read the operating
manual!
Warning Danger –
Machine running!
Before opening the housing
cover, pull out the mains plug!
The machine is totally insu-
lated!
Mixer may only be used when
casing is completely closed.
Place concrete mixer horizon-
tal on even hard ground.
Keep safe distance by filling
an unloading.
Warning!
The concrete mixer only agrees with
safety class if original insulating material
is used in case of repair and if there is
no alteration in insulating distance.
In this operating manual
Danger!
!
Non-compliance may result in injury.
Warning!
Non-compliance may result in damage.
Information:
Information about the product and
application tips.

Intended use

The concrete mixer may be used in private home
and garden. Concrete mixers may be used
exclusively in accordance with the information
stated in this operating manual.
−
Mixing concrete and mortar.

Improper use

−
It is not permitted to mix combustible, explo-
sive or harmful substances.
−
The concrete mixer must not be used in the
food industry.
−
The concrete mixer must not be operated in
a potentially explosive atmosphere.

Unpacking / Assembly

Danger!
!
The concrete mixer must not be used
until all parts have been fitted.
1. Check the contents of the packaging. If there
are any parts missing, contact your dealer.
2. Take the concrete mixer out of the wooden
crate with the help of a second person.
Information:
Fig. A shows the tools necessary for
assembly.
Attaching the wheel support and sup-
port foot, Figs. 1 to 7
1. Put the wheels onto the wheel axle.
2. Assure that safety ring is in correct positional
arrangement and mount it with the enclosed
pipe.
3. Fold out the wheels and support foot all the
way.
4. The lugs on the frame must be located in the
recesses in the support foot and the wheel
support.
5. Bolt and secure the wheel support and sup-
port foot to the frame:
−
Hexagon-head bolt
−
Washers
−
Hexagon-head lock nut M 8
6. Tighten the Hexagon-head lock nut.
Attaching the handwheel
Figs. 8 to 11
1. Unscrew hexagon bolt M12 x 45 and hexa-
gon lock nut M12, remove transportation
angles and dispose of.
2. Attach the tension spring to the bore in the
frame and to the hook on the handwheel.
3. Place your foot on the base plate of the
support foot and pull up the handwheel.
4. Screw in the bolt.
GB
M8 x 16 (2x)
(4x)
(2x)
GB 2