MIYOTA OS10 Manual De Instrucciones página 88

B) SETTING THE DAY AND TIME (HOUR, MINUTE AND SECOND)
The hour, minute, second and day are set by the same operation.
B-1) SETTING THE DAY
Pull the crown out to the 2nd position to stop the second hand at 0 (12 o'clock). Turn the hour/
minute hands in a clockwise direction to set a day In order to set the day, you must advance the hour
hand by 24 hours per day.
NOTE:
* If the day is set by turning the crown counterclockwise, there is the possibility the date will not
change over. Do not set the day by turning the crown in counterclockwise direction.
* The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.
B-2) SETTING THE TIME
After setting the day, set the hour and minute hands. Turn the hour/minute hands in a clockwise
direction to set the time. To ensure time is set accurately, first turn the minute hand 5 minutes ahead
of desired time and then turn back (in a counterclockwise) to the desired time. After setting the time,
use a time signal to synchronize the watch by pushing crown to the normal position to start the
second hand going.
87