MIYOTA FS16 Manual De Instrucciones

Instruction manual
English
page-1
Basic Specifications
1. Caliber No. :
FS16 / 26 / 17 / 27
F S16
7
*FS16 ・ 26 is for slanted push buttons
*FS17 ・ 27 is for parallel push buttons
2. Time : Type of quartz
standard
Frequency
Accuracy
Operating
temperature
3. Battery & : SR626SW 2YEARS *based on 1hour/day chronograph
Life
4. Function
Time : Hour , minute , second
Date
[ Dual Time ]
Chronograph 1/1 sec. Basis ( Up to 59 min. 59 sec. )
Features
This watch is an analog quartz watch which features dual time operation for
home time and local time.
"Home time" is the time where you live.
"Local time" is the time of the country or area you are visiting or you are
checking.
Displays and Buttons
FS26 / 27
Chronograph
second hand
Chronograph
minute hand
Hour hand
( local time )
Second hand
FS16 / 17
Chrono 60 min.
( 9H )
Reading the Watch
12 Hour-hand ( A )
12 Hour-hand ( B )
Local time Home time
24 Hour-hand ( C )
Home time
FS26
Cal.FS16,26,17,27
FS26
: Tuning fork type quartz crystal
: 32,768Hz
: ±20 s/month at the normal temperature of
+5℃ to +35℃ / 41°F to 95°F
: -10℃ to +60℃ / 14°F to 140°F
( EYE POSTION )
Minute hand
Button ( A )
FS26
Normal
Crown
Position
24 hour-hand
( home time )
Button ( B )
Calendar ( local time )
12 hour-hand ( home time )
( EYE POSTION )
24 hour-hand
( 12H )
F S1 6
7
Second hand ( home time )
when the watch hands appear in the diagram;
・ home time in GMT is 13:10:35
( 12 hour-hand ( B ) & 24 hour-hand ( C ) display )
・ local time in Tokyo is 10:10:35
(12 hour-hand ( A ) display )
Note
・ The minute and second hands are the same under
home and local time.
・ The 24 hour-hand ( C ) is synchronized with
12 hour-hand ( B )
・ The date is synchronized with 12 hour-hand ( A )
( local time )
Setting the Time
There are 2 ways to use the 12 hour-hand ( B ) and setting the time depends on
which way to use.
Please be very careful and follow the instructions below for setting the time
for both ways ( Type1 & Type2 ) .
[ TYPE 1 ]
Using the 12 hour-hand ( B ) and 24 hour-hand ( C ) for the "home time".
In other word,using hour hand and minute hand to see the "local time",
while the 12 hour-hand ( B ) and 24 hour-hand ( C ) to see the "home time".
( When you use in domestic, the 12 hour-hand ( B ) will be hidden under the
normal hour hand. )
12 Hour-hand ( A )
Local time
a) Setting the home time
1. Pull the crown out to the second position when the second hand has reached
the 0 position.
2. Turn the crown to set the current time, paying attention to the motion of
12 hour-hand ( B ) and 24 hour-hand ( C ) and minute hand.
3. Return the crown to the normal position.
Setting the 12 hour hand ( B ) and 24 hour hand ( C ) and minute hand has
been now completed.
4. Pull the crown out to the first position when the second hand has reached
the 0 position.
Turn the crown anticlockwise to set the current time.
☆Please also set the date together.
Please refer to the next page for more details in "the setting time".
Hour hand is linked with calendar. Please be careful if it is in morning or
afternoon when you set the time.
5. Return the crown to the normal position.
[ TYPE 2 ]
When you use the 12 hour hand ( B ) and 24 hour hand ( C ) for the "local time".
In other word,you can select this type when using the 12 hour hand ( B ) and 24
hour hand ( C ) to see the "second time zone"(the time which has time lag),
while the hour and minute hand and 12 hour hand ( B ) (linked with 24 hour-
hand ( C ) ) to see the "dual time".
For example, if you set the 12 hour hand ( B ) and 24 hour hand ( C ) to GMT
( Greenwich Mean Time ) and the normal hour and minute hand for the
"second time zone", you can check GMT anytime and anyplace.
a) Setting the home time
1. Pull the crown out to the second position when the second hands has reached
the 0 position.
2. Turn the crown to set the current time, paying attention to the motion of
12 hour-hand ( B ) and 24 hour hand ( C ) and minute hand.
3. Return the crown to the normal position.
Setting the 12 hour-hand ( B ) and 24 hour-hand ( C ) and minute hand has
been now completed.
4. Pull the crown out to the first position when the second hand has reached
the 0 position. Turn the crown anticlockwise to set the current time.
☆Please also set the date together .
Please refer to the next page for more details in "the setting time".
Hour hand is linked with calendar. Please be careful if it is in morning or
afternoon when you set the time.
5. Return the crown to the normal position.
12 Hour-hand ( B )
Home time
24 Hour-hand ( C )
FS26
Home time
Time correction
position